Markaudio AS 601

The AS 601 is a two-way full range active loudspeaker, 6“ B&C custom LF neodymium woofer and 1” HF driver on hyperbolic shaped horn.
The heart of the loudspeaker is a 300 watt rms power mosfet amplifier (AES standard) with switching power unit.
Dynamic control is handled by a digital processor which, suitably programmed, optimizes sound across the entire frequency spectrum and maximizes component reliability.
An efficient Virtual Sub function completes the set, useful in increasing energy on low frequencies when the loudspeaker is without subwoofer.

ACOUSTICAL SPECIFICATIONS

> Sound pressure

• Maximum peak : SPL 124 dB

> Frequency response

• Nominal (±3dB) : 67 Hz - 20 kHz
• Usable w/out Virtual SUB : 63 Hz - 20 kHz
• Usable with Virtual SUB : 48 Hz - 20 kHz

> Coverage

• Horiz x Vert : 90°x60°

> Transducers

• Woofer : LF 6"
• Magnet : Neodymium
• Driver HF : 1"
• Horn : Hyperbolic / rotable

ELECTRIC SPECIFICATIONS

> Power amp

• Type : Mosfet
• Power RMS : 300 Watt@4Ω
• Slew rate : 15V / us
• THD : <0,1 %
• Cooling : Convection, forced

> Protections

• DC current
• Thermal
• Short circuit
• Limiter

> Crossover

• Passive : 2,3 kHz

> Audio input

• Sensitivity : 500 mV
• Impedance : 10 kΩ

> AC Power

• Type : Switching
• Voltage : see note
• Power average/max : 350 W/700W

CONNECTIONS & CONTROLS

> Controls

• Virtual sub
• Level
• Gnd In - Gnd Out lift

> Indicators LEDs

• Power On
• Clip

> Connections

• Line In (xlr)
• Line Out (xlr)
• AC In (VDE)

CONSTRUCTION SPECIFICATIONS

> Cabinet

• Wood : Poplar plywood
• Finish : Textured paint
• Color : Brown 8022
• Protective grille : Nikel-coated

> Handles

• Q.ty : 1
• Location : Back

> Rigging

• Stand adapter 35mm
• M10 Nut adapter

> Dimensions

• Width : 225 mm - 8,86"
• Height : 356 mm - 14,02"
• Depth : 435 mm - 17,13"

> Weight

• 9 kg - 19,84 lbs